Combi Flash 7650 Series Manual de usuario descargar pdf (Pagina 74)

CombiFlash Torrent® User Manual

3-12

•If you selected Solid (Pause), the system

equilibrates the column with the starting %B solvent

mixture and then waits while you prepare the solid

sample load cartridge. When prompted, place the

cartridge on the system and click OK to continue.

•If you selected Solid, the system equilibrates the

column and immediately starts the separation. The

prepared solid load cartridge should be in place

before clicking the OK button.

•If you selected None (on Column), the system skips

the equilibration and immediately starts the

separation. The sample must be on the column before

clicking the OK button.

•If you selected Liquid, the system equilibrates the

column and then waits. When instructed, load the

liquid sample using the syringe injection (3.4.1) or the

Sample Load Pump (3.4.2) options.

3.4.1 Syringe Injection

Refer to Figure 3-6 for the following steps.

1. Connect the Liquid Injection Adapter from the accessory

kit to the Sample Injection Port.

2. Place the syringe on top of the Liquid Injection Adapter

valve.

Figure 3-6 Liquid Injection Adapter

Closed: handle

perpendicular

to tubing

Open: handle

in-line with tubing

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 158 159

Sin comentarios

Combi Flash 7650 Series Manual de usuario Pagina 74