Combi Flash 7650 Series Manual de usuario Pagina 21
- Pagina / 159
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
2-1
CombiFlash To r re n t
®
User Manual
Section 2 Preparation
This section provides instructions for unpacking and installing
the CombiFlash Torrent module. To prepare the system for
operation, sequentially follow all instructions in sections 2.1
through 2.15. Some of these sections provide instructions for
installing optional equipment which should only be completed
as required.
Note
Section 2.16 contains an Installation Qualification checklist. If
required, sign off the checklist entries as you successfully
complete the following sections.
2.1 Unpacking the Unit
The Torrent is shipped in a single carton. The optional
equipment will be shipped in additional cartons. Carefully
unpack the shipment and inspect the contents.
WARNING
The Torrent is heavy. Use a two-person lift to prevent injury.
Lift the Torrent from the container using the lifting handles
mounted on the side panels.
If there is damage to the shipping carton or any components,
contact the shipping agent and Teledyne Isco (or its
authorized representative) immediately.
WARNING
If there is any evidence that the Torrent has been damaged in
shipping, do not plug it into AC power. Contact Teledyne Isco
or its authorized representative for advice.
- CombiFlash Tor re n t 1
- User Manual 1
- 3. Operation 4
- 4. User Help Reference 4
- 5. Remote Interfaces 5
- 6. Maintenance 6
- 1.3 Operating Overview 9
- 1.4 Specifications 10
- Section 1 Introduction 11
- 1.6 Safety 15
- Warnings and Cautions 18
- Symboles de sécurité 18
- Advertencias y Precauciones 19
- 2.2 Instrument Location 22
- 2.3 Connect Power 22
- NSTALL OPTIONAL EQUIPMENT 23
- 2.5 Position the Torrent 24
- 2.6 Connect Solvent Lines 25
- (Solvent B) 26
- 2 turn using a wrench 27
- 8-inch fittings from the 28
- 2.8 Optional External Gas 31
- Waste (NO) 33
- In (Common) 33
- Drop Former (NC) 33
- ETWORK CONFIGURATION 34
- Section 2 Preparation 35
- From top of diverter valve 42
- Connect ELSD 43
- Standoffs (place over 45
- Disconnect 46
- 2.11 Grounding 48
- 2.12 Turn on Power 48
- 2.13 Configure the Torrent 48
- B priming pump 50
- 2.13.2 User Preferences 51
- EMOTE INTERFACES. Do not 52
- RIME B button 57
- Section 3 Operation 65
- 3.2 Sample Preparation 66
- 3.2.2 Solid Samples 67
- OOLS>MANUAL CONTROL) 68
- 4 turn to seal the fittings 71
- 3.4 Start a Default Method 72
- 3.4.1 Syringe Injection 74
- 3.5 During the Run 77
- Section 4 User Help Reference 81
- 4.1.2 Method File 82
- 4.2 PeakTrak Menu Options 83
- 4.2.1 File 84
- 4.2.1.1 New 84
- 4.2.1.2 Open 84
- 4.2.1.3 Manage Files 84
- 4.2.1.4 Set Data Path… 84
- [4.2.3.5]” command instead 85
- [4.3.5] window. From 85
- [4.2.1.9] menu command 86
- [4.3.7] window 87
- [4.3.8] 87
- [4.3.9] 87
- 4.2.3.4 Auto Zero 88
- 4.2.3.5 Edit defaults 88
- 4.2.3.6 Configuration 88
- 4.2.3.7 Set Password 88
- 4.2.3.8 User Management 88
- 4.3 PeakTrak Windows 90
- 4.3.1.1 Gradient Plot 91
- 4.3.1.2 Run Settings 91
- 4.3.1.5 Peak Collection Data 94
- 4.3.2 Method Editor 95
- 4.3.2.1 Button bar 95
- [4.3.10] settings 96
- [ON-LINE]. The 97
- [4.3.10] 98
- [4.4.5] 98
- 4.3.2.5 Peak Collection 99
- 4.3.2.6 Peak Detection 100
- 4.3.3 Gradient Optimizer 101
- [4.2.1.2] and SAVE 102
- [4.2.1.2] 103
- [4.2.3.1] menu command. The 104
- [4.2.3.3] from the 105
- [4.2.3.2] menu command. The 105
- [4.4.10] 106
- [4.2.3.3] menu 107
- [4.3.10.4] 107
- [ON-LINE] 107
- [4.3.11] 108
- [4.4.11] 108
- [4.3.2.5] settings on the 108
- ETWORK PRINTING feature 110
- 4.3.10.4 Fraction Collector 111
- 4.3.11 Set Password 112
- 4.3.12 User Management 113
- ON-LINE]) 114
- 4.4.2 Editing a method 117
- [4.4.5] topic for more 118
- [4.3.10] window 118
- [ON-LINE] for actual 119
- [4.2.1.9] 122
- [4.3.5] 123
- [4.2.3.5] menu command 123
- [4.4.2] 123
- [4.3.1] and 124
- [4.3.2] window 125
- [4.3.3]). Note the 126
- [4.3.5] window is displayed 127
- [4.3.1] 127
- [4.3.10.2] settings 128
- [4.4.7] help topic 129
- [4.3.9] window by 130
- [ON-LINE] topic 131
- CombiFlash To r re n t 133
- 5.1.1 Network PC Access 134
- 5.1.2 Network Printing 134
- Section 5 Remote Interfaces 135
- 5.2 Direct Connection 136
- 5.2.2 Windows Vista Settings 138
- 5.2.3 Windows XP Settings 140
- 5.2.4 Windows 2000 Settings 142
- 5.3 Direct Printing 144
- 6.2 Preventive Maintenance 146
- 6.3 Cleaning 147
- 6.4 Tubing Inspection 148
- 6.5 Flow Cell Cleaning 148
- Section 6 Maintenance 149
- Solvent Description 153
- DECLARATION OF CONFORMITY 157
Relacionado con productos y manuales para Cochecitos Combi Flash 7650 Series
Cochecitos Combi 7100 Series Manual de usuario
(8 paginas)
(8 paginas)
Cochecitos Combi 7100 Series Manual de usuario
(40 paginas)
(40 paginas)
Cochecitos Combi DK-5 4050 Manual de usuario
(16 paginas)
(16 paginas)
Cochecitos Combi 7100 Series Especificaciones
(104 paginas)
(104 paginas)
Cochecitos Combi Strolee Manual de instrucciones
(80 paginas)
(80 paginas)
Cochecitos Combi 2800 El manual del propietario
(40 paginas)
(40 paginas)
Cochecitos Combi Flash EX Especificaciones
(28 paginas)
(28 paginas)
Cochecitos Combi Flash EX 655 Especificaciones
(38 paginas)
(38 paginas)
Cochecitos Combi Flare Manual de usuario
(9 paginas)
(9 paginas)
Cochecitos Combi 7720 Manual de instrucciones
(22 paginas)
(22 paginas)
Cochecitos Combi 7100 Series Manual de usuario
(60 paginas)
(60 paginas)
Cochecitos Combi Flash EX Especificaciones
(50 paginas)
(50 paginas)
Cochecitos Combi CATALYST Manual de usuario
(12 paginas)
(12 paginas)
Cochecitos Combi Cosmo DX Guía de usuario
(18 paginas)
(18 paginas)
Cochecitos Combi Savona TS 4000 Manual de usuario
(218 paginas)
Cochecitos Combi Savvy Manual de usuario
(12 paginas)
(12 paginas)
Cochecitos Combi Twin Cosmo Manual de usuario
(12 paginas)
(12 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.053 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales