Combi Flash 7650 Series Manual de usuario descargar pdf (Pagina 69)

Section 3 Operation

3-7

Figure 3-3 Press the lever and extend the plunger

3. Slide the plunger into the cartridge until it reaches the top

frit (Figure 3-4).

4. Press the lever and push the cartridge into the cap. Align

the cartridge so that it fits fully into the recess in the cap

(Figure 3-5).

5. Load the solid sample cartridge with cap on the sample

injection port.

CAUTION

Pinch point. Your fingers or hands can be seriously

injured if you place them between the moving parts of

the Solid Load Cartridge Cap Mount or the Upper

Column Mount. Use care when installing solid load

cartridges or columns.

3.2.3 Preloading on Column

You can load the reaction mixture or sample directly onto the

column, sometimes called “direct” or “dry” loading.

Note

If using this method, use care to ensure that a column equilibration

does not wash away the sample. Bypass the column equilibration

at run time by selecting “Preload on column” as the sample

Loading Type. Refer to Section 3.4 for more details.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 158 159

Sin comentarios

Combi Flash 7650 Series Manual de usuario Pagina 69