Combi Flash EX 655 Especificaciones descargar pdf (Pagina 24)

24 Translation of the original operation manual

MDFE_mAtex_1307_en • jw

Installation and preparation

4 Installation and preparation

4.1 Safety measures at installation site

Comply strictly with the current rules for accident prevention.

➤ For each material sprayed, the corresponding data sheets must be

available. The information surrounding the viscosity, working temperatu-

re (flashpoint) and the mixing ratio stated by the manufacturer must be

observed and followed closely.

➤ Mount the Fluid Heater securely on the spray unit, a wall bracket or the

frame with carrying handle.

The system must have a fixed position and sufficient space to ensure

safe operating. The passage to the safety fittings must not be blocked.

➤ In case the heater is connected to the power supply in areas with risk of

explosion, the connection must be fitted with the appropriate Ex-Proof

rating.

➤ For versions without cable and cable connection, the owner / operator of

the equipment has to ensure that approved cable connectors (according

to EG-Baumusterprüfbescheinigung „X“, Pt. 17: Special Conditions) are

used.

Cable and cable connections must be designed for 165°C.

WARNING

This work may only be performed by a qualified electrician.

Observe the Ex-Proof zoning of the workplace.

➤ Before connecting the Fluid Heater to the electrical supply, check to

ensure that the point of hook-up is functioning correctly and no faults are

present.

➤ The owner / operator of this equipment is required to ensure that proper

protection against lightning strikes is available.

➤ Keep the working area, especially all gangways and standing areas,

clean. Remove spilled paint or solvent immediately.

➤ Pay attention that no moisture (ex: through rain, high-pressure cleaning,

etc.) gets into the Fluid Heater.

The Fluid Heater must never be immersed in a container of liquid (ex:

solvent).

➤ Ensure there is sufficient ventilation at the workplace to prevent damage

to health and property. Observe the manufacturer’s processing instruc-

tions at all times.

➤ Read and follow the instructions in the Operation manual for the spray

equipment and accessories.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

Sin comentarios

Combi Flash EX 655 Especificaciones Pagina 24